該頁無縮略圖
EcoCagile?
Flexible Cleaning Machines
The Effective Solution
2
EcoCagile supply module
The process
The EcoCagile M/L can either be equipped for use as a
pre-cleaner with a single-bath-technique or with a two
stage cleaning process for final cleaning. High-pressure
deburring with up to 600 bar (75 kW) is optional for both
variants. The basic configuration of low-pressure systems
and the power injection flood washing are already included
in the multifunctional container.
Power injection flood washing with the patented thin-flow
nozzle provides optimal results in the basic configuration
in the first process stage, while maintaining low energy
usage.
Next to many optionally available high-pressure tools, the
patented hybrid nozzle provides great results, especially
with complex cavities. This tool is used afloat submerged
and stands out due to, for example, its ability to reliably
eliminate jammed chips.
Details
The separate cleaning processes take place in different
multifunctional chamber. (high-pressure and low-processes
pressure). The chamber contains fixed spray systems for
powerful injection flood washing, targeted nozzles for
precision cleaning, and optional high-pressure deburring.
EcoCagile
Additional cleaning processes can
be retrofitted at any time:
? 7 bar power IFW for pre-cleaning
? Up to 600 bar for high-pressure deburring
? 7 bar for selective and/or general after-cleaning
The replaceable combinations of spray systems in the
multifunctional chamber allow greater flexibility. Water
pressure during washing and fixed spray systems in highpressure chamber can be varied according to requirements.
Optional high-pressure systems:
? Lances for deep drilled holes
? Nozzle rake for smaller areas
? Thin-flow and full-flow nozzles for targeted deburring
Technical data
M/1 Bad M/2 Bad L/1 Bad L/2 Bad HD Modul
Length 4,300 mm 4,300 mm 5,540 mm 5,540 mm 2,200 mm
Width 2,500 mm 3,400 mm 2,980 mm 3,780 mm 1,500 mm
Height 3,450 mm 3,450 mm 3,650 mm 3,650 mm 2,200 mm
Weight 6,000 kg 9,000 kg 7,000 kg 10,000 kg 800 kg
3
Smaller foot print for equipment, compared to
similar class products as a result of built-in
power module
Modular design allows addition or removal of
accessories according to customers’ requirements
Intelligent software tools simplify production
and maintenance operations as well as reduced
wear-and-tear and power-consumption
Built-in filtering device
Adequate protection for all electrical components
that come into contact with water
Large maintenance door facilitates easy
maintenanceand repair
Reduced requirements for spare parts, thus
reducing maintenance cost
Treatment module with
integrated 6-area robot
1
2
9
5
7 6
4
8
3
10
A general pre-drying of the workpiece is accomplished via
intense air blow-off in the treatment module. The blow-off
process can be combined with an optional vacuum drier to
ensure the product is 100% dry.
Fields of application
? Cylinder block
? Cylinder head
? Crank shaft
? Transmission and clutch housings
Power connection
Process module
High-pressure module
Maintenance area for high-pressure pump
Maintenance area for robot
Swarf container (on site)
EcoCfas – automatic filter
Process container with water knife & hybrid nozzle
Vacuum dryer
External exhaust system
1
2
3
4
5
6
7
8
9
10
www.ecoclean-group.net
? SBS Ecoclean Group ? 06/2024 ? EN ? Subject to change. The information in this brochure contains only general descriptions or performance characteristics which may vary in actual cases. The requested performance parameters shall be binding only if they are explicitly agreed within the sales contract.
Our Locations Worldwide
Center of Competence Monschau, Germany
Center of Competence Filderstadt, Germany
Rheineck, Switzerland (UCM)
Le Mans, France
Oslavany, Czech Republic
Alcester, UK
Shanghai, China Southfield, USA
Silao, Mexico
Pune, India
Group Headquarters, Frankfurt, Germany
