无码日本精品蜜桃_九一精品无码一区_亚瑟中文字幕欧美_AV丝袜一区二区_AV丝袜一区二区_中文无码有码88_手机在线播放av_青青日中文字幕

方軸執手系列SQUARESHAFTHANDLESERIES

方軸執手系列SQUARESHAFTHANDLESERIES

JCZ47R

表面處理：噴涂
方軸長度：配7\*7方軸，方軸外露長度L可按客 戶要求訂做
Surface treatment:Powdercoating
Square shaft length:With 7\*7 Square Shoft. Exposed Length L Can Be Customized

JCZ52

表面處理：氧化
方軸長度：方軸外露長度可按客戶要求訂做 Surface treatment: Anodised
Square shaft length: Exposed Length L Can Be Customized

JCZ53L

表面處理：氧化
執手分左右
方軸長度：方軸外露長度可按客戶要求訂做
Surface treatment:Anodised
Left side and right side
Square shaft length: Exposed Length L Can Be Customized

A

JCZ53R

表面處理：氧化
執手分左右
方軸長度：方軸外露長度可按客戶要求訂做
Surface treatment:Anodised
Left side and right side
Square shaft length: Exposed Length L Can Be Customized

COLOR顏色 色 光 金色 PVD金 古銅 黑色

方軸執手系列SQUARESHAFTHANDLESERIES

JCZ54

表面處理：氧化
方軸長度：方軸外露長度可按客戶要求訂做 Surface treatment:Anodised
Square shaft length: Exposed Length LCan Be Customize

JCZ55L

表面處理：氧化
執手分左右
方軸長度：方軸外露長度可按客戶要求訂做
Surface treatment: Anodised
Left side and right side
Square shaft length: Exposed Length L Can Be Customized

JCZ55R

表面處理：氧化
執手分左右
方軸長度：方軸外露長度可按客戶要求訂做
Surface treatment:Anodised
Left side and right side
Square shaft length: Exposed Length L Can Be Customizec

JCZ56

表面處理：氧化
方軸長度：方軸外露長度可按客戶要求訂做 Surface treatment:Anodised
Square shaft length: Exposed Length L Can Be Customized

方軸執手系列SQUARESHAFTHANDLESERIES

JCZ57L

表面處理：氧化
執手分左右
方軸長度：方軸外露長度可按客戶要求訂做
Surface treatment: Anodised
Left side and right side
Square shaft length: Exposed Length LCan Be Customized

又 1

JCZ57R

表面處理：氧化
執手分左右
方軸長度：方軸外露長度可按客戶要求訂做
Surface treatment:Anodised
Left side andright side
Square shaft length: Exposed Length L Can Be Customized

S

JCZ60

表面處理：氧化
方軸長度：方軸外露長度可按客戶要求訂做 Surface treatment:Anodised
Square shaft length: Exposed Length L Can Be Customized

JCZ60A-L

表面處理：氧化
執手分左右
方軸長度：方軸外露長度可按客戶要求訂做
Surface treatment: Anodised
Left side and right side
Square shaft length: Exposed Length L Can Be Customized

COLOR顏色 綠色 光 金色 PVD金 古銅 黑色

方軸執手系列SQUARESHAFTHANDLESERIES

JCZ60A-R

表面處理：氧化
執手分左右
方軸長度：方軸外露長度可按客戶要求訂做
Surface treatment: Anodised
Left side and right side
Square shaft length: Exposed Length L Can Be Customized

JCZ61

表面處理：氧化
方軸長度：方軸外露長度可按客戶要求訂做 Surface treatment:Anodised
Square shaft length: Exposed Length L Can Be Customized

JCZ61A-L

表面處理：氧化
執手分左右
方軸長度：方軸外露長度可按客戶要求訂做
Surface treatment: Anodised
Left side and right side
Square shaft length: Exposed Length L Cen Be Customized

JCZ61A-R

表面處理：氧化
執手分左右
方軸長度：方軸外露長度可按客戶要求訂做
Surfacetreatment:Anodised
Left sideandright side
Square shaft length: Exposed Length L Can Be Customized

方軸執手系列SQUARESHAFTHANDLESERIES

方軸執手系列SQUARESHAFTHANDLESERIES

方軸執手系列SQUARESHAFTHANDLESERIES

JCZ42R

表面處理：氧化
方軸長度：方軸長度規格可按要求選用
產品規格：分左右
Surface treatment: Anodization
Square shaft length:Customizable
Product specifications:Left/right

JCZ50L

表面處理：噴涂
執手分左右
方軸長度：方軸外露長度可按客戶要求訂做
Surfacetreatment:Powdercoating
Left side andright side
Square shaft length: Exposed Length L Can Be Customized

1

JCZ50R

表面處理：噴涂
執手分左右
方軸長度：方軸外露長度可按客戶要求訂做
Surfacetreatment:Powcercoating
Left side and right side
Square shaft length: Exposed Length L Can Be Customized

JCZ51

表面處理：噴涂
方軸長度：方軸外露長度可按客戶要求訂做 Surfacetreatment:Powdercoating
Square shaft length: Exposed Length LCan Be Customized

方軸執手系列SQUARESHAFTHANDLESERIES

COLOR顏色 色 光 金色 PVD金 古銅 黑色

極窄、幕墻型材平開專用隱藏式五金ULTRA-SLIMCONCEALEDHARDWAREDEDICATEDFORCASEMENTINCURTAINWALLPROFILES

專利產品 PatentedProduct

JCZZ03

產品名稱：隱藏式底座
表面處理：噴涂
用途：用于代替可拆方軸執手座
Item: Concealed base
Surface treatment: Powdercoating
Application:Used to replaoe the detochable square shaft handle

JCH100T雙向傳動器 JCH100TDOUBLE-WAYTRANSMISSIONDEVICE

專利產品 PatentedProduct

產品材質：鋅合金
表面處理：噴涂
適用范圍：幕墻結構20槽口型材，可搭配隱藏底座JCZZ03使用。
Meteril:Zincaloy
SurfaeTreatentoweroting
Apliatio2ei

安裝方向示意圖

安裝完成示意圖

JCH40單向傳動器JCH40ONE-WAYDRIVEDEVICE

產品材質：304不銹鋼面板+鋅合金
表面處理：本色
適用范圍：歐槽、窄體和幕墻型材用
Material: 304StainlessStel Penel + ZincAlloy
Surface Treatment: Natural Finish
Applicable Scope: European Groove/Narrow Body&Curtain
Wall Profiles

JCH41單向傳動器JCH41ONE-WAYDRIVEDEVICE

產品材質：鋅合金
表面處理：電鍍鋅
適用范圍：歐槽、窄體和幕墻型材用
Material: Zinc Alloy
Surface Treatment: Electro-galvanized
Applicable Scope: European Groove/Narrow Body &Curtein
Wall Profiles

Hinge Series 合頁(鉸鏈)

合頁(鉸鏈)JG/T125-2017

定義：用于連接窗框和窗扇、支承窗扇，實現啟閉的裝置。

性能指標：

1、合頁反復啟閉：使用頻率較高場所的門合頁 >=slant 20萬次；；使用頻率較低場所的門合頁 >=slant 10萬次；；窗的合頁2.5萬次。

2、合頁轉動力：

a、使用頻率|的門用明裝式、隱藏式合頁 <=slant 6 N b、使用頻率I的門用明裝式合頁、使用頻率川的窗用明裝式合頁、使用頻率Ⅲ的窗用隱藏式合頁≤40N。

使用范圍：家用平開門，內開窗。

Hinge JG/T125-2017

Definition:

Adevicethatconnectswindowframeandsash,supportswindowsashandrealizesopeningandclosingfunctior

Performance index:

1.Usagecounter2thousandtimesfordoorhingeofhigoperatingfrequency0Othousandtimesfooorhingeoflowopeating frequency;25thousand timesforwindowhinge.
2.The tuming force of the hinge:
a.≤6Nforoperating frequency 丨of exposed and concealed door hinge.
b.s40Nforoperatingfrequencyllofexposeddoorhinge,foroperatingfrequencyllofexposedandconcealedwindowhinge.
Scope of application: Household casement windowand door.

合頁的安裝和選用說明INSTALLATIONANDSELECTIONDESCRIPTION

選用安裝要點說明：

1、需根據我司提供的配置或其它相關技術資料正確合理選用與型材相匹配的及所需重量級別的合頁。
2、合頁與框扇型材的兩主受力接觸面需緊密相貼，不得有懸空和干涉現象。
3、大部合頁為不可調節合頁，門窗型材框扇制作時必需嚴格按照所選合頁與型材的配合尺寸（A)開料。
4、根據型材截面結構的特點及所選用的合頁不同，合頁通道(日)也有所不同，必須根據合頁與型材的配置所留的合頁通道正確選用密
封膠條。
5、與合頁相干涉的框扇型材密封膠條部位需留空。
6、具體承重能力與合頁安裝和型材有關。
7、部分合頁安裝時須分左、右安裝，如需安裝好后出廠，請訂貨時注明。

Keypointsforinstallation:

1.Selecthecoreineproddysorsuggstdytferenematelstgeustsitthroflddloda
2.Theconnectionamong thehinge,sashandframeshouldbefirmlyfixed,no gaporinterference.
3.Mostofthehingesareunadjustable,thewindowsashandframemustbeinstrictaccordancewiththehingeandprofile.(A)
4.Choose the rightshape rubber sealaccording to the different hinge space.
5.Leave enough space forthe installation of rubberseal.
6.Installationeffects the load beaing.
7.Somehingeshaverightandleftversion,pleasenotifyusiftheyourequirethehingestobeinstalledwellbeforedelivery.

合頁的使用注意事項：

1.凡是在安裝門窗后會使用腐蝕性溶劑清潔墻體的工程。
2.高層建筑工程（包括小高層）。
3.強烈季候風地區。
4.沿海地區。
以上情況請謹慎選用合頁式外開窗系統.建議采用滑撐系統系列。

注：

不同的合頁與不同斷面結構的型材配合.開孔安裝位置和尺寸均有不同，必要時請與我司技術部門聯系。

Usagenotice

1.Projectthat need tobecleanedwithcorrosivesolventafterinstallation.
2.Skyscraper.
3.Strong monsoon areas.
4.Coastalareas.
Carefullychoose the hinge incircumstancesabove.Friction stayis suggested. Note:
Different hingeand profile lead todifferent locationand sizeof the hole, please contact ourengineerwhen neccessary.

JH01

產品材質：鋁合金
表面處理：金、銀、古銅、黑
適用范圍：平開門、平開窗
最大承重：70KG/對
Material: Aluminumalloy
Surface treatment Gold,sliver, bronze, black
Scope of application:Cesementdoor Cesementwindow
Maximum load bearing:70 kg/pair

JH03

產品材質：鋁合金
表面處理：金、銀、古銅、黑
適用范圍：平開門、平開窗
最大承重：60KG/對
Material: Aluminum alloy
Surface treatment: Golc,sliver,bronze, bleck
Seope ofapplication: Casementdoor,casementwindow
Maximum load bearing: 60 kg/peir

JH06

產品材質：鋁合金
表面處理：金、銀、古銅、黑
適用范圍：平開門、平開窗
最大承重：70KG/對
Material: Aluminum alloy
Surface treatment Gold,iverrone, black
Seope of application: Casementdoor,casement window
Maximumload bearing:70kg/pair

合頁HINGE

JH21

產品材質：鋁合金
表面處理：氧化
適用范圍：平開門、窗
最大承重：70kg/對，偏心可調士1mm
Material: Aluminum alloy
Surface treatment:Anodization
Scope ofaplication:Casementdoorwindow
Maximum load bearing: 7okg/pair, ecoentricity adjustable ±1mm

JH19

產品材質：鋁合金
表面處理：氧化、噴涂
適用范圍：歐標20槽平開門、窗
最大承重：200kg/對

合頁HINGE

3D可調合頁 3-WAYADJUSTABLEHINGE

免預埋安裝合頁FLUSH-MOUNTED HINGE(PRE-EMBEDDING-FREE INSTALLATION)

免預埋安裝合頁FLUSH-MOUNTED HINGE(PRE-EMBEDDING-FREE INSTALLATION)

JH20

產品材質：鋁合金
表面處理：噴涂
適用范圍：平開門、窗
最大承重：200kg/組
Material: Aluminum all:y
Surface treatment spyining
Soope of application:Cmentdccr, window
Maximum load bearing:200 kg/el

1

JH20A

產品材質：鋁合金
表面處理：噴涂
適用范圍：平開門、窗
最大承重：150kg/組
注：合頁分左右
Material: Auminum allcy
Surfacetreatmeninting
Seope of application: Cement dccr, window
Maximumloadbearing:1.50kg/sel
Note: Lelt and right version

1

JHM001合頁

產品材質：鋁合金
表面處理：噴涂
適用范圍：平開門、窗
最大承重：120kg/對
Material: Aluminum allcy
Surfce treatmentsprayning
Seope of application: Cementdocr windv
Maximum load bearing:1.20kg/pair

隱藏合頁 CONCEALEDHINGESERIES

隱藏合頁 CONCEALEDHINGESERIES

產品材質：不銹鋼
表面處理：本色
最大承重：60kg/對，安全系數n=1.5
適用范圍：適用于歐標扇20槽內平開窗，合頁分左右
Material: Stainlessteel
Surfce treatment:Nturlolor
Maximumloadbearing:60kg/pairsfetyfctorn=1.5
Scope ofapplication:ltisapplicableto theinswingingcasement windowofthe
stendardEuropeenstyle20slotandtherisleftandrightdiferenceofthehnge
產品材質：不銹鋼
表面處理：本色
最大承重：45Kg/對，安全系數n=1.5
適用范圍：內外平開窗/防火窗，合頁分左右
Material: Stainless steel
Surface treatment: Natural color
Maximumloadbearing:45Kg/pair，safetyfectorn=1.5
Scope of application: Casement Windows/fire Windows, hinge with left and right
產品材質：不銹鋼
表面處理：本色
最大承重：50Kg/對，安全系數n=1.5
適用范圍：適用于標準歐式20槽內外平開窗通用/防火窗，合頁分左右
Material: Stainless steel
Surface treatment: Natural color
Maximum load bearing:5oKg/pair,safety factor n=1.5
Scope of application: Suitable for 20mm groove European standard inward and outward opening window with fire-proof Hinge distinction left and right

JHY21

JHY22A-L/R

JHY30L/R

隱藏合頁 CONCEALEDHINGESERIES

JHY30C-L/R

JHY30D-L/R

產品材質：不銹鋼
表面處理：本色
最大承重：50Kg/對，安全系數n=1.5
適用范圍：適用于平槽型材內外平開窗通用/防火窗，合頁分左右
Material: Stainless steel
Surface treatment Nauralcoor
Maximumload bearing:5oKg/pair,safety fador n=1,5
Scope of appliceation: SuitabTeTorAluminumProfiles WithoutGroove opening window with fire-proof Hinge distinction left and right
產品材質：不銹鋼
表面處理：本色
最大承重：50Kg/對，安全系數n=1.5
適用范圍：適用于歐標扇20槽，框23槽的內平開窗，合頁分左右
Material:Sinssa
Surface treamentN
Maximumloadbearing:5Okg/pair,salelylx.on=1,5
Scopeofapplication:Suitabllrimwardasmnwindwwilh20grcedanand23 grccve crameclEuropean slandard, Hinge has leltversicn and rightversicn,

隱藏合頁 CONCEALEDHINGESERIES

產品材質：不銹鋼
表面處理：本色
最大承重：25Kg/對
適用范圍：適用于標準歐式20槽內平開紗窗，合頁分左右
Material: Slainlessslel
Surface treatment: Naluralcolr
Maximum load bearing: 2Kg/pair
Application: Suitable hrstandard Eurorean 25grccve imward openingscreen windcw,hinge has leltside andright side,
產品材質：不銹鋼
表面處理：本色
最大承重：20Kg/對
適用范圍：適用于標準歐式20槽內平開紗窗，合頁分左右
Material: Stinlesssleel
Surface treatment: Nalual
Maximum load bearing:2OKg/pair
Applieation: Suitable Iorstandard European 20grccve inward openings.reen window, hinge has lelt side and rightside,
產品材質：不銹鋼
表面處理：本色
最大承重：18Kg/對
適用范圍：適用于標準歐式20槽內平開紗窗，合頁分左右
Material:Slinlesel
Surface treatment: Naluralol
Maximumload bearing:18kgir
Application: Suitable brstandard Eurorean 2Ogrccve imward cpeningscreen windcw,hinge hos leltside ondright side,

JHY31L/R

JHY49L/R

JHY37L/R

產品材質：304不銹鋼+鋅合金表面處理：本色+電鍍最大承重：80Kg/對

適用范圍：選用于標準歐式20槽內平開窗，可調合頁不分上下。

Product material: 304 stainlessteel + zinc alloy
Surface treatment: original color+electroplating
Maximum load-bearing capacity: 80Kg/pair
Application range: suitable for standard Europeen 20-slotinward-opening windows,
adjustable hinges without top or bottom cistinction

JHY26L/R

產品材質：不銹鋼
表面處理：拉絲
適用范圍：適用于幕墻型材/平開窗/平開門
Product material: Stainless steel
Surface treatment: Polishing
Seope of application: Euro-stzndard 20-casement doors and windows

產品主要特點：

1.產品材質選用優質高強度304不銹鋼制造，表面磁性拋光處理；
2.采用旋鉚式多連桿結構；
3.產品適用于平槽口的普通和幕墻型材用平開窗、懸窗；
4.產品最大開啟角度：70度；
5.平開窗用最大承重70Kg/對，懸窗用最大承重150Kg/對，安全系
數n { } = 1 .5，產品分左右。

Mainfeaturesof theproduct：

1.The product ismadeof high-quality high-strength 304 stainless steel,andthesurface ismagneticallypolished; 2.With spinrivetingmulti-bar structure; 3.The product is suitable for side-hung and top-hung window for curtain wals which aluminium profilesare flat notches; 4.Themaximumopeningangle of the product:70 degrees 5.Maximum bearing capacity forcasement windowis7Okg/pair. Maximumbearingcapacity for top-hungwindowis15oKg/pair, Satetyfactor n = 1 . 5 It hasleft sideandright side.

幕墻專用重型平開、懸窗鉸鏈 HEAVY-DUTYFOUR BAR HINGEFOR SIDE-HUNG ANDTOP-HUNG WINDOWFOR CURTAIN WALLS

JHY45L/R

產品主要特點：

1.產品材質選用優質高強度304不銹鋼制造，表面磁性拋光處理；
2.采用旋鉚式多連桿結構；
3.產品適用于平槽口的普通和幕墻型材用平開窗、懸窗；
4.產品最大開啟角度：70度；
5.平開窗用最大承重120Kg/對，懸窗用最大承重200Kg/對，安全系
數n { \bf \varepsilon } = \bf { 1 } .5，產品分左右。

Main featuresof the product:

1.The product is made of high-quality high-strength 304 stainless steel,and thesurface ismagneticallypolished; 2. With spin riveting multi-bar structure; 3.The product is suitable for side-hungand top-hung window for curtain wals which aluminium profilesare flat notches; 4.Themaximumopeningangle of the product:70 degrees 5.Maximumbearingcapacityforcasementwindowis120kg/pair. Maximumbearingcapacity fortop-hungwindowis2ooKg/pair, Satetyfactor \scriptstyle n = 1 . 5 It hasleft sideandrightside.

JHY52L/R

Scope of application: Euro-standard 20-casement doors and windows

產品主要特點：

1.產品材質選用優質高強度304不銹鋼制造，表面磁性拋光處理；
2.采用旋鉚式多連桿結構；
3.產品適用于平槽口的普通和幕墻型材用平開窗、懸窗；
4.平開窗用最大承重80Kg/對，懸窗用最大承重150Kg/對，安全系
數n = 1 . 5 , 產品分左右。

Main featuresof the product：

1.The product is made of high-quality high-strength 304 stainless steel,and thesurface ismagneticallypolished; 2.With spin riveting multi-bar structure; 3.The product is suitable for side-hung and top-hung window for curtain wallswhich aluminium profilesare flat notches; 4.Maximum bearingcapacity forcasement windowis8okg/pair. Maximumbearingcapacity fortop-hungwindowis15oKg/pair, Satety factor \scriptstyle 1 = 1 . 5 Ithasleft sideand right side.

Hydraulic Multi-functional Hinge Series 液壓多功能合頁

合頁左右區分示意圖： Thediagramfordifferentiating the leftand right of the hinge:

性能特點：

1、小于85度自動關門；
2、在92度、160度具有定位功能；
3、在160---180度自動復位，有效防止門扇與墻體碰撞；
4、閉門力度、速度可任意調節；
5、安裝便捷快速。

Performance index:

順時針旋入15mm Screw clockwise for 15 mm

1.Automatically close when the door is less than 85□.
2.Stay firm when the door is92or 160°.
3.Automaticallyresetwhenthedoorisbewteen160-180effectively
prevent the door from hitting the wall.
4. Closing force and velocityare adjustable.
5.Installation is convenient and quick.

拆除合頁，旋松此緊定螺釘，裝上時須鎖緊此螺釘，否則關門會發出異響

Twist the screw when remove the hinge, firmly twist the screw when install, otherwise it will creat sound when closing the door.

液壓合頁選用建議 HYDRAULICHINGESELECTIONSUGGESTIONS

液壓合頁四種功能設置(出廠前設定)： Four features of hydraulic hinge (factorysetting)

1、定位，入鎖（適用于嵌裝斜舌鎖體的門扇）

1.Postioning, lock setting (suitable for door sash that installed latch tongue lock body)

門框

最大開門角度175°，自動復位到160°，防止門扇碰撞 Maximum open angle:175\*, automatic restoration to 160to prevent the sash and the frame from hitting.

2、定位，靜音（適用于隱形門，及裝電磁鎖的門扇）

靜音閉門，沒有門扇碰撞的聲音

2, Postioning,silencing (suitable for irvisible door and door sash with electromagnetic lock) Closing the door without noise

門框

最大開門角度175°，自動復位到160°，防止門扇碰撞

Maximum open angle:175\*, automatic restoration to 160\*to prevent the sash and the frame from hiting.

門框

最大開門角度175°，自動復位到160°，防止門扇碰撞

Maximum open angle:175\*,automatic restoration to 160\*to prevent the sash and the frame from hitting.

4、常閉，靜音（適用于隱形門，及裝電磁鎖的門扇） 4. Normallyclosed, silencing (suitable for inwisible door and door sash with electromagnetic lock)

門框

最大開門角度175°，自動復位到160°，防止門扇碰撞 Maximum open angle:175°, automatic restoration to 160°to prevent the sash and the frame from hitting.

液壓多功能合頁 HYDRAULICMULTI-FUNCTIONALHINGE

JH22

表面處理：氧化
顏色可選：砂金、砂銀、啞黑
最大承重：80Kg/組
注：合頁分左右
Surface treament: Anodization
Color available: Gold sndy，silversendy, mated black
Maximum load bearing:50kg/pair
Note:Leftandrightversion
表面處理：氧化
顏色可選：砂金、砂銀、啞黑
最大承重：80Kg/組
注：合頁分左右
Surface treament:Anodization
Color available: Gold sandy,silversendy, matted black
Maximumload bearing:80kg/pair
Note: Left and right version

Friction Stay Series 滑撐

滑撐

JG/T127-2017

義：用于連接窗框和窗扇，支承窗扇，實現向室外產生旋轉并同時平移開啟的多桿件裝置

性能指標：

1.一組滑撐的自定位力應可調整到不小于40N。
2.外平開窗用滑撐的啟閉力不應大于40N。外開上懸窗用滑撐的啟閉力應符合標準分級的規定。
3.外平開窗用滑撐運動過程中操作力不應大于80N。
4.反復啟閉3.5萬次后，各部件不應脫落，包角和滑槽不應開裂，啟閉力和操作力不應大于80N，扇、框間密封間隙變化值不應大于1.5mm。
使用范圍：適用于窗扇開啟距離不大于300mm的建筑外開上懸窗，扇寬度不大于570mm的外平開窗用滑撐。

Friction Stay JG/T127-2017

Definition:

Itisusedtoconnectwindowframeandwindowfansupportwindowfanndisthemuli-bardevicewhichcouldrealizeto rotateto theoutsideand translationallyopenatthesame time.

Performance index:

1.Theself-positioning force of a group of slide stands could be adjusted to notless than 40N.
2.Theopeningandclosing forceoftheslidestandfortheoutswinging casementwindowshouldnotexceed4ON.Theopening andclosingforceoftheslidestandusedforopeningtheupperhangingwindowshouldmettherequirementsofthestandard classification.
3.Theoperatingforcein theprocessofslidestandmovementforoutswingingcasementwindowshouldnotexceed80N.
4Repeatedyopenngandosing3oieteartsshouldnotfallfftangleandheutehouldotaedt openingandclosingforceandoperatingforceshouldnotexceed8ON,thechangeinthesealgapbetweenthefanandframe should not exceed 1.5mm.

Scope of application:

Itisappicabletotheslidestandforoutswingingcasementwindowswhosefanwidthisnotmorethan57omm,andtheupper hanging windowofbuildings whose window opening distance is notmore than 300mm.

滑撐的選用和安裝SELECTIONANDINSTALLATION

滑撐的選用

The selection of friction stay滑撐的選用需根據窗戶的重量和窗型大小確定：

1.滑撐的要求承重二窗扇的重量(玻璃重量+窗扇型材重量）x安全系數1.3-1.5。由窗重查《滑撐鋁窗規格表》得到滑撐所滿足承重要求的系列或規格。

滑撐的長度規格選用：一般情況下是窗寬的2/3，如果窗戶較輕時，可以為1/2。

3.根據分別滿足第1、2項窗重和窗戶尺寸的要求從滑撐鋁窗規格表中查得滑撐的規格長度。

4.窗扇的最大開啟角度還與滑撐系列的選用及安裝位置有關

5.非同一類型、同一尺寸的一對滑撐不能裝到一個窗戶上

Theselection offriction staydepends on the windowweightand size
1.Frictionstayshouldbeartheweightofthesash (glass+profile)\*safetyfactor1.3-1.5
2.Selectionofitslength:Normallyis2/3ofthewindowwidth,or1/2ifthewindowislighter.
3.Thelengthoffrictionstaycanbereferredaccording tothe tworequirementsabove.
4.Themaximumopeningangleofthesashisrelevantwiththeselectionofthefrictionstayanditsinstallation.
5.Different sizeand typefriction stay cannot be installon the same window.

滑撐緊固螺絲或螺釘?shù)倪x用

Theselectionofstainlesssteel screw

滑撐緊固采用M5x8不銹鋼螺絲，分別為；沉頭和盤頭。

根據實際情況合理用螺絲或螺釘，在此建議凡是有沉孔的地方必須用沉頭，其它地方如滑槽或沒有沉孔的地方則用盤頭.這樣才能保證其安裝的牢固可靠性。（如左圖)

必須使滑撐與窗扇及窗框牢固連接，不得松動。所有螺絲孔都必須擰上螺絲或螺釘，少一個都必將影響到滑撐的承重能力。

建議鋁型材底部墊上襯鋼，固定采用機制螺絲。

M5\*8stainlesssteelscrewisused tofastenthefrictionstay,bothcountersunkheadandpanhead.
Selectthescrewaccordingly,wesuggestcountersunkheadmustbeusedwherethereisacounterbore,panheadcanbe used elsewhere.
Frictionstaymustbefimlyfixedwiththesashandtheframealtescrewholesmustbetwistedwithscrews,otherwiseit willeffectheload bearing.
Wesuggestputingsteelining on the bottomoftheprofileandusing machine-processedscrewto fasten.

滑撐對型材的配合要求與安裝

Theinstallationand itsrequirementsonprofile

安裝滑撐時應保證窗框扇之間的距離為滑撐的疊高，一般為16.5一17.5毫米，具體技術參數見后面滑撐系列和實物。

安裝時還需注意滑撐應盡量靠窗框的外邊緣，三角頭要靠框邊放，同時保證上下兩支滑撐對稱安裝。

Makesurethedistanceofwindowsashandframeisthe heightofthefrictionstay generally16.5-17.5mm,pleasereferto thenextpagesfordetails.

Thefrictionstay should be close to the outward edge of the windowframe.The delta head should be placed next to the frame. Bothupperand bottom friction stay should be symmetricallyinstalled.

滑撐的維護The maintenance of friction stay滑撐需要定期的檢查維護，滑撐的底槽中不能落入沙子、水泥、石灰等硬質雜物和酸堿性腐蝕物.及太多的灰塵等.這樣會使窗戶在開關時不順暢，滑撐中應定期的加入一潤滑油。

Friction stay should be checked and maintained regularly.Window willbe unsmooth ifsand,cement,dust,anyhardobjectorcorrosiveobjectfallsinto thebottomof the frictionstay.Lubeshould beadded regularly.

1.用最優良的304不銹銅制造。
2.用于上懸窗中，可單獨使用，用于重型窗時需增加支撐。
3.滑撐應優先保證與型材的聯接強度，其聯接力應大于承重級別。
4.選擇滑撐規格時，必須時滿足窗重和窗尺寸規格大小。
5.懸窗開啟距離需在300mm內。
6.所有折片厚度3.0mm。
7.滑撐安全系數n=1.3-1.5。

1.Material: Highquality304stainlesssteel.
2.One pair is enough for top-hung window,another stay is needed for heavy duty window.
3.Make sure thejoining strength ofthe profileandthefriction stayisgreater than the loadbearing.
4.Thefirctionstaymust meetthe weightand the size of thewindow.
5.The open distance of the top-hungwindow should be within 300mm.
6.Everythicknessof baris3.0mm.
7.safetyfactor n=1.3-1.5.

HHKXJ系列上懸窗滑撐HHKXJTop-hungWindow Friction Stay Series

HHKXJ系列上懸窗滑撐

HHKXJTop-hung Window Friction Stay Series

HHKXJ系列重型上懸窗滑撐HHKXJSERIESHEAVY-DUTYTOPHUNGWINDOWFRICTIONSTAY

1.用最優良的304不銹銅制造。
2.重型上懸窗專用滑撐，用于大窗扇時需增加支撐配合使用。
3.滑撐應優先保證與型材的聯接強度，其聯接力應大于承重級別。
4.選擇滑撐規格時，必須時滿足窗重和窗尺寸規格大小。
5.懸窗開啟距離需在 3 0 0mm 內。
6.滑撐安全系數n=1.3-1.5。

1.Madeofthefinest304stainlesssteel.
2.Heavy duty top hung window dedicated frictionstay, stayarmshould be added when used for large sash ofwindow.
3.Prioritytoensuringtheconnectionstrengthwiththeprofile,and itsjoint forceshould be greater than the bearing level
4.Specificationsofa frictionstay,itmustmeet the window weightand windowsize specifications
5.Theopeningdistance ofatop hungwindowshould bewithin 300mm.
6.safetyfactorn=1.3-1.5.

HHKXJ系列上懸窗滑撐HHKXJTop-hungWindow FrictionStay Series

HHKXJ系列上懸窗滑撐HHKXJTop-hungWindow FrictionStaySeries

1.適用于鋁合金型材；
2.選用優質SUS304不銹鋼制造；
3.符合JG/T127-2017《建筑門窗五金滑撐》標準；
4.產品隨著技術的改進，某些參數會有所變化，請以實物為準。
5.所有折片厚度3 3 . 0 { \ m } { \ m } 。
6.滑撐安全系數n=1.3-1.5。

1.Applicable toaluminumalloyprofiles;
2.Usehigh-qualitySUs304stainlesssteelformanufacturing;
3.Meet JG/T127-2017buildingdoorsandwindowshardwareslide stand standards;
4.Some parameters of the productwillchange with the improvementof technology,sopleasereferto theactual product.
5.Everythicknessof baris3.0mm.
6.safety factor n=1.3-1.5.

HHXJ10-L/R懸窗滑撐

1.選用優質SUS304不銹鋼制造，及插入式設計；
2.符合JG/T127-\*\*《建筑門窗五金滑撐》標準；
3.歐標20槽上懸窗專用：快速安裝，框免銑槽，扇免墊槽；
4.滑撐最大開啟角度50度，可及實現20度、30度、45度定位。
5.滑撐最大承重65Kg/對，安全系數n=1.3-1.5。
6.產品隨著技術的改進，某些參數會有所變化，請以實物為準；
7.選擇滑撐規格時，必須時滿足窗重和窗尺寸規格大小；

1.Manufacturedwithhigh-qualitySUS304stainlesssteelandaplug-indesign;
2.CompliantwiththeJG/T127-\*\*"BuildingWindowandDoorHardwareSliding Support"standard;
3.SpecificallydesignedforEuro-standard2ogroovestop-hungwindows:quick installation,noneedtomillgroovesinframesoraddgroovesundersashes;
4.Themaximumopeningangleoftheslidingsupportis50degrees,anditcanbe positionedat20degrees,30degrees,and45degrees.
5.Themaximumload-bearingcapacityoftheslidingsupportis65Kg/pair,witha safetyfactorn=1.3-1.5.
6.Productparametersmaychangewithtechnicalimprovements;pleasereferto theactualproduct;
7.Whenselectingthespecificationsoftheslidingsupport,itmustmeetheweight andsizerequirementsofthewindow.

HHKJ14A-L/R平開滑撐

加重型頂平開滑撐(分左右)

1.適用于鋁合金扇歐標20槽型材；
2.選用優質SUS304不銹鋼制造；
3.符合JG/T127-2017《建筑門窗五金滑撐》標準；
4.產品隨著技術的改進，某些參數會有所變貨，請以實物為準；
5.滑撐最大承重：60Kg/對，安全系數n=1.3-1.5。

Heavyduty casement window friction stay(divided into left or right version)

1.Suitable foraluminumalloy Europeanstandard20 groovesash.
2.Choose the high-quality 304 stainless steel;
3.Conform to the JG/T127-2017 "Building DoorandWindow Hardware Friction stay"Standard
4.With the technical improvement,some parameters of the product will be changed,please take theactual productasreference
5.Themaximum load of frictionstay:6okG/pair,safety factorn=1.3-1.5.

HHKJ14B-L/R懸窗滑撐

加重型頂懸窗滑撐（分左右）

1.適用于鋁合金扇歐標20槽型材；
2.選用優質SUS304不銹鋼制造；
3.符合JG/T127-2017《建筑門窗五金滑撐》標準；
4.產品隨著技術的改進，某些參數會有所變貨，請以實物為準。
5.滑撐最大承重：80Kg/對，安全系數n=1.3-1.5。

Heavydutytop hungwindow frictionstay(divided into leftorright version)

1.Suitable foraluminumalloy Europeanstandard20 groovesash;
2.Choose the high-quality 304 stainlesssteel;
3.Conformto theJG/T127-2017 "Building Doorand Window Hardware Friction stay"Standard
4.With the technical improvement,some parametersof theproduct will be changed,pleasetake theactual productasreference.
5.Themaximum load offrictionstay:8okG/pair,safety factor n=1.3-1.5.

1.適用于鋁合金型材；
2.選用優質SUS304不銹鋼制造；
3.符合JG/T127-2017《建筑門窗五金滑撐》標準；
4.產品隨著技術的改進，某些參數會有所變化，請以實物為準。
5.折片厚度2.5、3.0厚薄搭。
6.滑撐安全系數n=1.3-1.5。

1.Applicable toaluminumalloyprofiles;
2.Usehigh-qualitySUS304 stainlesssteelformanufacturing;
3.Meet JG/T127-2017buildingdoorsandwindows hardware slide stand standards;
4.Some parametersof theproductwillchange with the improvementof technology,sopleaserefertotheactualproduct.
5.Barthickness2.5、3.0combination.
6.safetyfactorn=1.3-1.5.

JHKD14B-14X

1.選用優質SUS304不銹鋼制造，及插入式設計；
2.符合JG/T127-\*\*《建筑門窗五金滑撐》標準；
3.歐標20槽上懸窗專用：快速安裝，框免銑槽，扇免墊槽；
4.產品隨著技術的改進，某些參數會有所變化，請以實物為準。
5.滑撐應優先保證與型材的聯接強度、其聯接力應大于承重級別。
6.選擇滑撐規格時，必須時滿足窗重和窗尺寸規格大小。

1.Selectionof high quality SUS304stainlesssteel manufacturing,and plug-in design;
2.In line with JG/T127-\*\* "Building door and window hardware friction stay" standard;
3.European standard 2Omm groove top hung window special: quick installation, frame freemillingslot,sash freecushionslot;
4.Product with the improvement of technology,some parameters will change, pleaserefertotheactualmaterial prevail
5.Friction stay should give priority to ensuring the connection strength with the profile,andits joint forceshould be greater than thebearing level
6.When selecting the friction stay specifications,itmust meet the window weight and window size specifications.

JHKD\*\*X-14A懸窗滑撐

1.選用優質SUS304不銹鋼制造，及插入式設計；
2.符合JG/T127-\*\*《建筑門窗五金滑撐》標準；
3.歐標20槽上懸窗專用：快速安裝，框免銑槽，扇免墊槽；
4.產品隨著技術的改進，某些參數會有所變化，請以實物為準；
5.滑撐應優先保證與型材的聯接強度、其聯接力應大于承重級別；
6.選擇滑撐規格時，必須時滿足窗重和窗尺寸規格大小；
7.滑撐安全系數n=1.3-1.5。

1.Madeof high qualitySUS3o4stainlesssteel,andplug-indesign;
2.Comply with JG/T127-\*\* "Building doorand Window hardware frictionstay" standard;
3.European standard 20mm groove top hungwindowspecial: quick installation,framefree millingslot,sash freecushionslot;
4.Product with the improvementof technology,someparameterswillchange, please prevail in kind;
5.Friction stay should give priority to ensuring the connection strength with the profile,and its joint forceshould be greater than the bearing level
6.Whenselecting thefrictionstayspecifications,itmustmeet the window weight and window size specifications.
7.safety factor n=1.3-1.5.

JHKD\*\*X-14A系列上懸窗滑撐JHKD\*\*X-14ATop-hungWindowFrictionStaySeries

JHKD ^ { x \star x } X -14A系列上懸窗滑撐

JHKD\*\*X-14ATop-hungWindowFrictionStaySeries

JHKC12B-L/R平開滑撐

技術要求

1.選用優質SUS304G不銹鋼制造；
2.符合或高于JG/T127-\*\*《建筑門窗五金滑撐》標準；
3.適用于歐標20槽，高承重免銑槽，高效快裝；
4.滑撐最大承重60KG，安全系數n=1.3-1.5。
5.產品分左右；
6.產品隨著技術的改進，某些參數會有所變化，請以實物為準。

TechnicalRequirements

1.Madeof highqualitySUS304G stainlesssteel
2.Meet or higher than JG/T127-\*\*"Building doorand window hardware frictionstay"standard;
3.Suitable for Europeanstandard20mmgrooveprofile,high load bearing, nomillingsloteficientandfastoading;
4.frictionstaymaximum bearingcapacityis6okG,safety factor n=1.3-1.5.
5.products with left/right option
6.Product with the improvement of technology，some parameters will change,pleasereferto theactualmaterial prevail

JHKC12D-L/R平開鉸鏈

1.選用優質SUS304G不銹鋼制造；
2.符合或高于JG/T127-\*\*《建筑門窗五金滑撐》標準；
3.適用于歐標20槽，高承重免銑槽，高效快裝；
4.滑撐最大承重50KG，安全系數n=1.3-1.5。
5.產品分左右；
6.產品隨著技術的改進，某些參數會有所變化，請以實物為準備。

1.Made from high-qualitySUS304G stainlesssteel;
2.Complies with or exceeds the JG/T127-\*\*"Building Windowand Door Hardware Hinge Support"standard;
3.Suitable forEuro-standard20 grooves,high load-bearing
4.Maximumloadcapacityof thehinge support is5okG,safety factor n=1.3-1.5.
5.The product comesin leftand right versions;
6.With technical improvements,some parametersmay change;pleaserefer to the actual product.

JHY11A-L/R

1.選用優質SUS304不銹鋼制造；
2.符合JG/T127-\*\*《建筑門窗五金滑撐》標準；
3.特殊的導入專利設計，及專業的抗擾設計和制造工藝；
4.滑撐最大承重80kg/對，安全系數n=1.3-1.5；
5.適用于歐標20槽平開窗，高度可調節；
6.產品分左右；
7.產品隨著技術的改進，某些參數會有所變化，請以實物為準。
1.Material: high quality SUS3o4 stainlesssteel.
2.Comply withthe standardofJG/T127-BuildingDoorand Window Hardware--FrictionStay";
3.Special design with guide patent,professionalanti-interference designand manufacturing process.
4.Maxload-bearingoffrictionstay isBokg/pairsafety factor n=1.3-1.5.
5.Suitable for European standard 20mmgroove casement window,andits weightisadjustable.
6. The product can be divided into left and right version.
7.Viththedevelopmentofthetechnolgy,someprameterswillbecnged,leaserefertotereal
product.
1.選用優質SUS304不銹鋼制造；
2.符合JG/T127-\*\*《建筑門窗五金滑撐》標準；
3.特殊的導入專利設計，及專業的抗擾設計和制造工藝；
4.滑撐最大承重80kg/對，安全系數n=1.3-1.5；
5.適用于歐標20槽平開窗；
6.產品分左右；
7.產品隨著技術的改進，某些參數會有所變化，請以實物為準。
1.Material: high quality SUS304 stainless steel.
2.Comply withthe standard ofJG/T127-Building Doorand Window Hardware-FrictionStay"
3. Special design with guide patent, professional anti-interference design and manufacturing process.
4.Max load-bearing of friction stay is 80kg/pair,safety factor n=1.3-1.5.
5.Suitable for European standard 20mm groove casement window.
6.The product can be divided into left and right version.
7.Viththedevelopmentofthetechnolcgy,someprameterswillbecnged,pleaserefertotereal
product.